Query returned 974 results.
GLOBAL PRODUCT DEVELOPMENT: PROJECT-BASED MULTIDISCIPLINARY JOINT COURSE
Leung, Winnie (1); Wang, Yun (2); Kim, Seong-Woo (3) // 2019
Over three years 2016-2019, three top universities in Asia have joint hands in offering a truly collaborative course ~ Global Product Development. Leveraging modern teaching tools to overcome ...
Implementation of parameterized work piece deviations and measurement uncertainties into performant meta-models for an improved tolerance specification
Mller, Andreas Michael (1); Oberleiter, Thomas (2); Willner, Kai (2); Hausotte, Tino (1) // 2019
Geometrical work piece deviations are unavoidable and directly affect the function and quality of
technological products. Tolerance management is regarded as a crucial subtask of the development ...
IMPROVEMENTS IN WATER INTERVENTION PROJECTS THROUGH PRODUCT DESIGN METHODS
Buck, Lyndon; Harlow, Richard // 2019
At a 2018 community workshop for the EU Horizon 2020 WATERSPOUTT project in Chikwawa, Malawi, villagers discussed water collection from the Shire river. WATERSPOUTT aims to provide safe drinking ...
Influence of gas-filled gaps on the thermal behaviour of Dual Purpose Casks
Dinkel, Christian (1); Billenstein, Daniel (1); Rieg, Frank (1); Roith, Bernd (2) // 2019
Basically, the safe dissipation of heat is among others an important protection objective of dual purpose casks. Gas-filled gaps within such casks can play a major role for the thermal behavior as ...
innovative design in factory - new methods to go from closed to expandable prescriptions at the shop floor level
Harl // 2019
This paper explores the question of the design activity at the shop floor level. The design activity has been confined for a large part in the design and the methods office. However, a certain form ...
Integrating The Mechanical Domain Into Seed Approach
Dworschak, Fabian; K // 2019
Data-driven technologies have found their way into all areas of engineering. In product development they can accelerate the customization to individualized requirements. Therefore, they need a ...
INTERNAL AND EXTERNAL STAKEHOLDERS’ IMPACT ON PRODUCT DEVELOPMENT CURRICULUM DESIGN
Lindsten, Hanna Hellin; Auvinen, Petra Johanna; Juuti, Tero Sakari // 2019
rs do not develop curriculum independently of other stakeholders. Instead, the development activity is seen here as a joint effort of both internal and external stakeholders having a common goal of ...
Matrix-Based Multivariate Analysis of Survey Data on Potentials for the Collaboration of Design and Simulation
Schweigert-Recksiek, Sebastian; Koch, Christian; Lindemann, Udo // 2019
Companies are increasingly forced to assert themselves in the market through efficient product development. Since use and potential of mechanical simulations have greatly increased in recent years, ...
Medical device design practitioner strategies for prototype-centered front-end design stakeholder engagements in low-resource settings
Coulentianos, Marianna J.; Rodriguez-Calero, Ilka; Daly, Shanna R.; Burridge, Jocelyn; Sienko, Kathleen H. // 2019
Prototypes have the potential to provoke discussion and to encourage stakeholders to play an active role during design engagements in the front-end phases of a design process. However, detailed ...
Method Toolbox for the multidisciplinary planning and development of adaptive buildings
Honold, Clemens; Leistner, Sophia; Roth, Daniel; Binz, Hansgeorg; Sobek, Werner // 2019
Adaptive buildings constitute an interdisciplinary approach for realizing the next generation of buildings in order to reduce the immense material requirements and energy demand throughout all ...
Methods and principles of product design for small-scale production based on 3D printing
Jure Salobir, Jože Duhovnik, Jože Tavčar // 2019
Technology of 3D printing is opening the possibility for small-scale production in quantities between ten and several hundred pieces. The technology of adding material enables the production of ...
METHODS IN NPD FOR STARTUPS: EVALUATING STAGE GATE, DESIGN THINKING & LEAN STARTUP KEY CONCEPTS WITH STUDENTS
Sandy, Margot Lynn // 2019
In the last 5 years, the demand for new goods has increased dramatically with the consumer products business seeing large gains in online sales and still some growth in brick and mortar stores. These ...
Mixed-Method Design for User Behavior Evaluation of Automated Driver Assistance Systems: An Automotive Industry Case
Orlovska, Julia (1); Novakazi, Fjolle (1,2); Wickman, Casper (1,2); Soderberg, Rikard (1) // 2019
Automotive systems are changing rapidly from purely mechanical to smart, programmable assistants. These systems react and respond to the driving environment and communicate with other subsystems for ...
MODEL BASED DEFINITION: FINALLY, THE ENGINEERING DRAWING KILLER?
Garland, Nigel Patrick; Wade, Russell; Glithro, Richard; Palmer-Smith, Sarah // 2019
The death of the Engineering Drawing has been foretold many times since the first CAD systems began automating the technical product specification (TPS) process. As CADCAM technology advanced it ...
MODEL BASED SYSTEMS ENGINEERING INTRODUCTION WITHIN INDUSTRIAL ENGINEERING CURRICULUM
DAVID, Pierre (1); BLANCO, Eric (1); REVOL, Sebastien (2); NOYRIT, Florian (2); COATRINE, Michel (3) // 2019
Systems Engineering (SE) has been initially developed to manage large complex system development in the defense or aerospace industry. As the complexity of product increase, the product development ...
New Approach on the Allocation of Wear Allowances - a Case Study
Schubert, Dominik (1); Rohrmoser, Andreas (2); Hertle, Sebastian (1); Wartzack, Sandro (3); Hagenah, Hinnerk (2); Merklein, Marion (2); Drummer, Dietmar (1) // 2019
To maintain functional tolerances of gear sets over their lifetime, especially in polymer-seel gear sets, the wear behaviour must be considered. The state of the art in wear modelling does not take ...
Optimization approaches in design for Additive Manufacturing
Rosso, Stefano; Savio, Gianpaolo; Uriati, Federico; Meneghello, Roberto; Concheri, Gianmaria // 2019
Nowadays, topology optimization and lattice structures are being re-discovered thanks to Additive Manufacturing technologies, that allow to easily produce parts with complex geometries.
The primary ...
Organisation design seen through systematic design
Cornelis, Thomas (1,2); Dubois, Patrice (1); Omhover, Jean-Fran // 2019
Organizations seeking to improve their performance, like Corporate Social Responsibility targets, face a key organisational design challenge. Designing the key components of the organization and ...
OVERCOMING THE CHALLENGES OF GLOBAL COLLABORATION THROUGH DESIGN EDUCATION
Brisco, Ross (1); Whitfield, Robert Ian (1); Grierson, Hilary (1); Bohemia, Erik (2) // 2019
As technologies evolve students expect to be able to utilise the same functionality they use for personal and social communication for their academic and professional communication. To support ...
Perceived quality evaluation with the use of extended reality
Stylidis, Kostas; Dagman, Andreas; Almius, H // 2019
If designers want to communicate quality aspects of the product, there is a need to bring these characteristics into the measurable space of perceived quality (PQ) attributes. To illustrate the ...
PRINCIPLES OF ENGINEERING DESIGN; TEACHING ACROSS DISCIPLINES
Barrie, Jeff; Norman, James // 2019
This paper discusses the delivery of design principles across engineering disciplines, in particular between Mechanical/Design Engineering and Civil Engineering. The paper discusses a 5 week ...
Robustness Evaluation of Product Concepts based on Function Structures
Goetz, Stefan; Hartung, Jonas; Schleich, Benjamin; Wartzack, Sandro // 2019
Due to the varying environment conditions as well as the manufacturing induced deviations, the properties of products vary. In order to still meet the increasingly tightening of functional ...
Sequential updating of quantitative requirements for increased flexibility in robust systems design
Funk, Matthias (1); Jautze, Marcus (2); Strohe, Manfred (2); Zimmermann, Markus (3) // 2019
In early development stages of complex systems, interacting subsystems (including components) are often designed simultaneously by distributed teams with limited information exchange. Distributed ...
SURVEY ON LEARNING CONCEPTS APPLYING CREATIVITY METHODS IN EDUCATION AND INDUSTRY
Nutzmann, Marc (1); Sauer, Thorsten (1); VOß, Markus (2); Bozkurt, Hulusi (2) // 2019
Mechanical Engineering students acquire knowledge and skills in engineering design through several courses reaching from learning how to setup technical design drawings, CAD-courses, several courses ...
Boolean Searches
The following examples demonstrate some search strings that use boolean operators:
- design community
Find rows that contain at least one of the two words. - +design +community
Find rows that contain both words. - +design community
Find rows that contain the word “design”, but rank rows higher if they also contain “community”. - +design -community
Find rows that contain the word “design” but not “community”. - +design ~community
Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not. - +design +(>community <decisions)
Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions” - design*
Find rows that contain words such as “design”, “designs”, “designing”, or “designer”. - "some words"
Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.