Query returned 998 results.
Robust multi-objective optimization in product development with respect to user-scenario and manufacturing uncertainties
Wolniak, P., Cramer, J., & Lachmayer, R. // 2021
Simulation-based performance analysis for future robust modular product architectures
Dambietz, F., Greve, E., & Krause, D. // 2021
Simultaneous definition of key characteristics in order to facilitate robust design in early product development stages
Goetz, S., Horber, D., Schleich, B., & Wartzack, S. // 2021
Transparency of design automation systems using visual programming – within the mechanical manufacturing industry
Heikkinen, T. // 2021
Upcycling obsolete mechanical equipment into innovative laboratory test rigs: a low-cost solution or a sustainable design approach?
Rogkas, N., Tsolakis, E., Kalligeros, C., Vasileiou, G., Vakouftsis, C., Kaisarlis, G., . . . Spitas, V. // 2021
A BOTTOM-UP FUNCTIONAL DOMAIN SYNTHESIS APPROACH FOR CREATIVE CONCEPTUAL DESIGN
Li, Yutong; Wang, Yuxin // 2020
For expanding the solution space of conceptual design, a bottom-up functional synthesis approach through a partition of the functional domain of the design problem for mechanical products based on ...
A CONCEPTUAL MODEL COMBINATION FOR THE UNIFICATION OF DESIGN AND TOLERANCING IN ROBUST DESIGN
Grauberger, P., Goetz, S., Schleich, B., Gwosch, T., Matthiesen, S. and Wartzack, S. // 2020
AN ANALYSIS OF SOCIO-COGNITIVE ACTIVITIES DURING CO-CREATIVE DESIGN SUPPORTED BY SPATIALIZED AUGMENTED REALITY
Masclet, Cédric; Baldacchino, Laetitia; Boujut,Jean-François // 2020
This study investigates the mechanisms by which spatial augmented reality (SAR) technology can affect socio-cognitive processes in groups involved in co-creative design sessions. A protocol analysis ...
AN INVESTIGATION OF A GENERATIVE PARAMETRIC DESIGN APPROACH FOR A ROBUST SOLUTION DEVELOPMENT
Li, H., Brockmöller, T., Gembarski, P. C. and Lachmayer, R. // 2020
Characterizing Systems Of Systems Change And Failure Via Network-based Metrics
Fakhfakh, Sarra; Hein, Andreas Makoto; Chazal, Yann; Jankovic, Marija // 2020
A System of System (SoS) is a synthesis of independent systems functioning together towards a common goal. They are characterized by their dynamic nature and evolvability during operation: addition, ...
CONCEPTION OF A DIGITAL TWIN IN MECHANICAL ENGINEERING – A CASE STUDY IN TECHNICAL PRODUCT DEVELOPMENT
Schweigert-Recksiek, S., Trauer, J., Engel, C., Spreitzer, K. and Zimmermann, M. // 2020
Designing Lightweight Structures under Consideration of Material and Structure Uncertainties on Different Levels of the Building Block Approach
Hartwich, Tobias S.; Völkl, Harald; Wartzack, Sandro; Krause, Dieter; // 2020
Lightweight design is an important aspect in the development of components to reduce material use and obtain energy-efficient structures. Frequently, lightweight structures are designed for one or a ...
GOOD IDEA OR BAD IDEA? – TEACHING KNOWLEDGE-BASED ENGINEERING IN A FLIPPED CLASSROOM
Gembarski, Paul Christoph // 2020
The application of computer-aided design (CAD) systems belongs to the very basic competences that a design engineer in mechanical engineering is taught. The definition of shape and product properties ...
Identifying modularity practices across mechanics, electronics and software
Askhøj, Christoffer; Løkkegaard, Martin; Bertram, Christian Alexander; Mortensen, Niels Henrik // 2020
In this paper we present five modularity practices across the domains of mechanics, electronics and software deduced from observations from four companies. The practices are made to help product ...
Learning to Design in a Serious Game
VOß, Markus (1); BOZKURT, Hulusi (1); SAUER, Thorsten (2); NUTZMANN, Marc (2) // 2020
The paper describes, discusses and reflects how a second year Engineering Design project in a Mechanical Engineering bachelor’s programme has been 'gamified' by introducing 'playful' elements into ...
Making customer integration in company processes persistent: Comparison of literature and industrial perspective
Vogel, Simone; Kreimeyer, Matthias; Richter, Ronny; Spinler, Stefan // 2020
Companies lack efficient mechanisms for the systematic and continuous integration of customers in order to generate benefits and to avoid further complicating their internal processes. A gap was ...
On the Treatment of Equality Constraints in Mechanical Systems Design Subject to Uncertainty
Stumpf, Julian; Naumann, Thomas; Vogt, Marc Eric; Duddeck, Fabian; Zimmermann, Markus // 2020
In early phases of product development, uncertainty may be treated by a set-based design method relying on so-called solution spaces. In this approach, all relevant system requirements are used to ...
Potentiale datengestützter Methoden zur Gestaltung und Optimierung mechanischer Fügeverbindungen
Zirngibl, Christoph; Schleich, Benjamin; Wartzack, Sandro; // 2020
Due to the increasing requirements on lightweight constructions, the demands for efficient joining processes are constantly rising. Therefor cold forming processes provide a faster and less expensive ...
Problem-based learning in introductory thermodynamics and fluid mechanics
Coutts, Euan // 2020
Problem-based learning (PBL) is a pedagogical approach which aims to create engaged and thorough long term learning. This is achieved by setting problems centered around a challenge encountered in a ...
PRODUCT DESIGN EDUCATION IN MECHANICAL AND MANAGEMENT ENGINEERING MASTER’S DEGREE PROGRAMS. ANALOGIES AND DIFFERENCES
De Napoli, Luigi; Rizzuti, Sergio // 2020
Mechanical and management engineering are some of the stakeholders involved in product development, with different competencies. They must share the responsibility for best solution identification to ...
ROBUST DESIGN FOR IOT – ON THE RELEVANCE OF MECHANICAL DESIGN FOR ROBUST SENSOR INTEGRATION IN CONNECTED DEVICESH.
Juul-Nyholm, H. B., Eifler, T. and Ebro, M. // 2020
A concept for process-oriented interdisciplinary tolerance management considering production-specific deviations
Heling, Bjoern; Oberleiter, Thomas; Rohrmoser, Andreas; Kiener, Christoph; Schleich, Benjamin; Hagenah, Hinnerk; Merklein, Marion; Willner, Kai; Wartzack, Sandro // 2019
To meet rising customer requirements, increasingly complex products have to be virtually validated. To achieve this within the framework of virtual product development, a wide range of aspects has to ...
A Framework for Development Architecture for Modular Products: Cross-Domain Variety Management Perspective
Oh, Kwansuk; Lim, Jong Wook; Cho, Seongwon; Ryu, Junyeol; Hong, Yoo S. // 2019
Variety management is a cross-domain issue in product family design. In the real field, the relationships across the domains are so complex for most of the existing product families that they cannot ...
A methodology for the application of virtual evaluation methods within the design process of cold forged steel pinions
Rohrmoser, Andreas (1); Heling, BjÓrn (2); Schleich, Benjamin (2); Kiener, Christoph (1); Hagenah, Hinnerk (1); Wartzack, Sandro (2); Merklein, Marion (1) // 2019
Gears are essential machine elements in the drivetrain and transmission technology. The operational behaviour of a gear pairing is influenced by the design of the gear kinematics as well as the ...
Boolean Searches
The following examples demonstrate some search strings that use boolean operators:
- design community
Find rows that contain at least one of the two words. - +design +community
Find rows that contain both words. - +design community
Find rows that contain the word “design”, but rank rows higher if they also contain “community”. - +design -community
Find rows that contain the word “design” but not “community”. - +design ~community
Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not. - +design +(>community <decisions)
Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions” - design*
Find rows that contain words such as “design”, “designs”, “designing”, or “designer”. - "some words"
Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.