SIG-Library

Query returned 868 results.

AN ASSESSMENT OF METHODS TO SUPPORT THE DESIGN OF FUTURE ROBUST MODULAR PRODUCT ARCHITECTURES

Greve, Erik; Krause, Dieter // 2018
Modular product architectures enable not only a trade-off between the external variety demanded by the customer and the cost-causing internal variety, but also facilitate the ability to react on ...

Analysis of dynamic system behaviour using sequence modelling with the C&C²-Approach – a case study on a power tool hammer mechanism

Matthiesen, Sven; Wettstein, Andreas; Grauberger, Patric // 2018
In product development, the building of simulation models for analysis is a general approach. Nowadays, products are mostly developed in generations, which means these models can be re-used in ...

APPLICATION OF “CODEVE” METHODOLOGY IN TRANSATLANTIC STUDENT DESIGN PROJECT

Kovacevic, Ahmed; Howell, Bryan; Jagadeesh, Chetan; Read, Matthew; Horak, Peter; Tarnok, Zsolt; Hazen, Garrett; Leto, Amar // 2018
COllaborative DEsign in Virtual Environment (CODEVE) is a teaching methodology developed within the European Global Product Realisation (EGPR) course over a number of years. It was developed to ...

APPROACHES TO TEACHING PRODUCT DESIGN TO ENGINEERING STUDENTS

Sathikh, Peer Mohideen // 2018
3D computer aided design (CAD) and 3D printing seems to have developed to such a degree that the students in engineering courses are made to believe that they could attempt to design all aspects of a ...

Augmenting Physical Prototype Activities in Early-Stage Product Development

Kohtala S. M. I.; Erichsen, Jørgen Andreas Bogen; Sjöman, Heikki; Steinert, Martin // 2018
Prototyping in the early-stage of product development is widely used for exploring solutions and generating knowledge. Prototypes in the form of tangible artefacts have many advantages, including ...

BALL BEARINGS AS SENSORS FOR SYSTEMATICAL COMBINATION OF LOAD AND FAILURE MONITORING

Schirra, Tobias; Martin, Georg; Vogel, Sven; Kirchner, Eckhard // 2018
In modern machine architecture, complex mechanical components guarantee the function of the system. Specific maintenance rates reduce maintenance effort and cost. The combination of load and failure ...

COME AND PLAY SERVICE DESIGNER WITH US! - CO-CREATING A PLAYABLE CUSTOMER JOURNEY INSTALLATION

Pirita Johanna Ihamäki, Katriina Irina Heljakka // 2018
""User-centered design or user-focused design are terms which describe processes that attempt to involve potential customers or users within a design process. The intention of such processes is to ...

COMMUNITY OF TECHNOLOGY, UNLEASH YOUR POWER TO EDUCATE - “A NEW ORGANISATIONAL APPROACH TO INTEGRATE COMPETENCE, KNOWLEDGE AND SOLUTION DRIVEN PATHWAYS”

Braam, Wilco; Persaud, Stefan; van den, Mirjam Bosch; Troxler, Peter // 2018
Trends and driving forces around us are moving fast in multiple directions. Technical developments in the fields of circular economy, internet of things, bio-based products, robotics, energy and ...

CORPORATE REQUIREMENT CULTURE IN DEVELOPMENT OF A LARGE SCALE MEDICAL SYSTEM: A CASE STUDY

DelSpina, Brandon; Gilliam, Sarah; Summers, Joshua; Morkos, Beshoy // 2018
This case study explores requirements evolution of a medical device system. The study focuses on the analysis of requirements via interviews and document analysis. The mechanical, software, and ...

CREATIVE PATH TO PRACTICAL KNOWLEDGE - CASE OF A TRIPLE HELIX FRAMEWORK

Čok, Vanja; Fain, Nuša; Žavbi, Roman; Vukašinović, Nikola // 2018
The paper presents a successful Triple helix collaboration between university, industry and government that resulted in commercialisation of a sustainable new product within the aircraft industry. ...

CYCLE TO DISCOVER NEW NEEDS

Tsubasa Nakamura, Yukari Nagai // 2018
In recent years, owing to the widespread use of digital fabrication, spaces for creators, such as fab laboratories and working spaces, are increasing. However, it is difficult to discover new needs ...

DATA DRIVEN DESIGN SELECTION AND GENERATION - AN INDUSTRIAL CASE STUDY ON ELECTRIC MOTORS

Tüchsen, Johann; Pop, Adrian Cornel; Koch, Matthias; Schleich, Benjamin; Wartzack, Sandro // 2018
This paper presents a novel design selection and generation mechanism for fast and efficient solution-finding based on the knowledge-based systems concept. Such a mechanism can be fully exploited in ...

DEFINING AGILE CULTURE USING TOPIC MODELLING

Rebentisch, Eric; Schuh, Günther; Dölle, Christian; Mattern, Christian; Abel, Hendrik // 2018
The implementation of Agile Methods is often subject to failure, with cultural issues being the most commonly named reason. The purpose of this paper is to analyse the relationship between ...

DESIGN EXPLORATION OF BIOMORPHIC FREEFORM UNIT CELLS FOR ADDITIVELY MANUFACTURED LATTICE STRUCTURES UNDER COMPRESSIVE LOADS

Thallemer, Axel; Kostadinov, Aleksandar; Fam, Abel; Teo, Alex // 2018
Additive manufacturing methods facilitate the production of complex cellular materials. Commonly, their designs are based on primitive solids using linear struts without curvature continuous joints ...

Design for Qualification: A process for developing additive manufacturing components for critical systems

Dordlofva, Christo; Törlind, Peter // 2018
Additive Manufacturing (AM), and more specifically Powder Bed Fusion, offers design freedom, functional integration, and cost efficient manufacturing of customised products. These design and ...

Design of a flexible chain for winch based point absorbers

Andersson, Kjell; Sellgren, Ulf; Hagnestål, Anders // 2018
Wave power is a renewable energy source with a potential to cover up to 10% of the world ́s present energy consumption. It has however been difficult to find a cost effective solution to convert the ...

DESIGN THINKING VIA FLIPPED CLASSROOM

Canina, Marita; Bruno, Carmen; Piselli, Agnese // 2018
A new generation of learners is growing up with information and communication technology (ICT) as an integral part of their everyday lives. They want to be active and experiential learners, ...

DEVELOPMENT OF A METHODOLOGY FOR ROBUST EVALUATION OF PERCEIVED QUALITY OF VEHICLE BODY PANEL GAPS

Duraiswamy, Vidya; Campean, Felician; Harris, Steve; Munive-Hernandez, J. Eduardo // 2018
This paper presents research into perceived quality of vehicle body split lines / gaps. The survey based methodology combined direct attribute evaluation and choice experiments with multiple test ...

Development of Simulation Based Machine Design course

Jaakma, Kaur; Kiviluoma, Panu // 2018
While the traditional product design method emphasizes the structure and the documentation of the design work, simulation based design can add more value to the design process by using for example ...

EFFECT OF MEMBERS’ PROFESSIONAL DIVERSITY IN GROUP ON CREATIVE THINKING

FUSE, Emi; WAKABAYASHI, Kazuki; SAITO, Shigeki // 2018
In this study, we experimentally investigated the effect of members’ professional diversity in a group on creative thinking, by adopting a new evaluation method of group creativity. The creative ...

ENABLING GRADUATED STUDENTS TO DESIGN FOR ADDITIVE MANUFACTURING THROUGH TEACHING AND EXPERIENCE TRANSFER

Ferchow, Julian Felix; Klahn, Christoph; Meboldt, Mirko // 2018
The cyclic manufacturing processes of Additive Manufacturing (AM) create three-dimensional objects layer by layer, offer a large freedom in design, and suffer from very different restrictions ...

ENGAGING STUDENTS WHILE TEACHING DESIGN TOPICS ACROSS DIVERSE PROJECTS

Benjamin, Stacy; Anderson, John // 2018
We present an approach for integrating design topics in an undergraduate capstone design course. In addition to project work, students learn design topics, such as IP, robust design and DFMA. ...

Evaluating the value and costs of technology in the manufacturing industry

Mämmelä, Janne; Juuti, Tero; Korhonen, Tuomas; Julkunen, Pasi; Lehtonen, Timo; Pakkanen, Jarkko; Vanhatalo, Mikko // 2018
This paper aims to show the shortcomings of current technology valuation methods and propose a new approach to evaluating the value and costs of technology in the manufacturing industry. It uses ...

EXPERIENCES WITH 'DIRECT PRODUCT FEEDBACK' IN COURSES ON ENGINEERING DESIGN

Sauer, Thorsten; Voß, Markus; Bozkurt, Hulusi; Nutzmann, Marc // 2018
The article reflects student learning experiences with open-ended problems in an Engineering Design project by presenting a questionnaire-based survey that was conducted in a course held during the ...

Boolean Searches

The following examples demonstrate some search strings that use boolean operators:

  • design community
    Find rows that contain at least one of the two words.
  • +design +community
    Find rows that contain both words.
  • +design community
    Find rows that contain the word “design”, but rank rows higher if they also contain “community”.
  • +design -community
    Find rows that contain the word “design” but not “community”.
  • +design ~community
    Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not.
  • +design +(>community <decisions)
    Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions”
  • design*
    Find rows that contain words such as “design”, “designs”, “designing”, or “designer”.
  • "some words"
    Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.

Please sign in to your account

This site uses cookies and other tracking technologies to assist with navigation and your ability to provide feedback, analyse your use of our products and services, assist with our promotional and marketing efforts, and provide content from third parties. Privacy Policy.