Query returned 1003 results.
THE PROCESS OF OPTIMIZING MECHANICAL SOUND QUALITY IN PRODUCT DESIGN
Nielsen, Thomas Holst; Eriksen, Kaare Riise // 2011
The research field concerning optimizing product sound quality is a relatively unexplored area, and may become difficult for designers to operate in. In some degree, sound is a highly subjective ...
TOWARDS ASSESSING THE VALUE OF AEROSPACE COMPONENTS: A CONCEPTUAL SCENARIO
Bertoni, Marco; Bertoni, Alessandro; Johansson, Christian // 2011
The development of complex products, characterized by long lifecycles and deep supply chains, requires enhanced capabilities to assess, in an early design stage, the value of a solution not merely ...
UMEA - A FOLLOW UP TO ANALYSE UNCERTAINTIES IN TECHNICAL SYSTEMS
Engelhardt, Roland; Wiebel, Marion; Eifler, Tobias; Kloberdanz, Hermann; Birkhofer, Herbert; Bohn, Andrea // 2011
In mechanical engineering uncertainties occur during the entire life cycle of a product. These uncertainties are defined as deviations from process and product properties. This makes the development ...
UNDERSTANDING ENGINEERING SYSTEMS THROUGH THE ENGINEERING KNOWLEDGE GENOME: STRUCTURAL GENES OF SYSTEMS TOPOLOGIES
Shai, Offer; Reich, Yoram // 2011
The design of contemporary products requires knowledge from diverse disciplines. Presently, there is very little common denominator among engineering disciplines. This state of affairs is hurting ...
USE OF CONSTRAINTS IN THE EARLY STAGES OF DESIGN
Mullineux, Glen // 2011
At the very early stages of original design work, the aspects of concept, scheming and analysis tend to merge. It is only as the designer’s understanding of the design task increases that these ...
A Comparative Evaluation of Aptitude in Problem Solving in Engineering Education
de Vere, Ian; Kuys, Blair; Melles, Gavin // 2010
Engineering education has been criticised for focusing solely on the science of engineering, to the detriment of preparing students for the practice of engineering. Graduates are considered by many ...
A Framework for Evaluating Product Architecture of AutomationProduction Facilities
Kissel, M.P.; Eben, K.G.M.; Braun, S.; Schmidt-Colinet, J.; Obermeier, M.; Lindemann, U.; Vogel-Heuser, B. // 2010
Some interdisciplinary products are still designed with blinders. To develop automation systems, teams of each involved discipline can work on their particular subsystem (software, controller, ...
A PROCEDURAL MODEL TO ASSESS MAIN INFLUENCES OF PRODUCTION ON PRODUCT DESIGN
Helten, K.; Hellenbrand, D.; Lindemann, U. // 2010
Production as one of the main limiting factors must be considered during product design. Today product concepts need to be robust, i.e. in this context suitable for various production concepts and ...
Allowing Playfulness - Examining Innovativeness
Lindh Karlsson, Monica; Berglund, Anders; Ritzen, Sofia // 2010
A child’s playfulness and ability to fantasize are also key creative mechanisms in adulthood. Allowing low formal control functions and high self determination is valuable for intrinsic motivation, ...
Calculating the Impact of Form Variations on the Position of Parts
Stoll, Tobias; Lauks, Christian; Meerkamm, Harald; Wartzack, Sandro // 2010
Methods to calculate the possible effects of assigned tolerances to key criteria of a product are widely used to assure high quality standards. The used algorithms of state of the art tolerance ...
Challenges in Conceptual Design of Fencing Systems, Students View
Kovacevic, Ahmed; Halai,Ashwin; Ghazihesami, Rouzbeh; Verdegver ,Javier; Gowree ,Erwin Ricky; Jeshani, Snehal; Valtera, Jan // 2010
A systematic engineering design process is recommended for use in industry. Still many design teams tend not to follow it and consequently their designs are not adapted to a customer needs. Even when ...
COMPUTER-AIDED CROSS-DOMAIN MODELING OF MECHATRONIC SYSTEMS
Gausemeier, J.; Dorociak, R.; Pook, S.; Nyßen, A.; Terfloth, A. // 2010
Mechatronics – the symbiotic cooperation of mechanics, electrics/electronics, control engineering and software engineering – opens up fascinating perspectives for the development of future products. ...
Defining Production Processes in Early Phases Using "Solution Space Representatives”
Mathias, Johannes; Kloberdanz, Hermann; Eifler, Tobias; Engelhardt, Roland; Birkhofer, Herbert // 2010
Within this paper, the model of the „Solutions Space Representatives” (SSR) is presented. The use of the model allows the parallel modelling of products and their processes in mutual dependency ...
Design education as research playground
Sonneveld, Marina Henrieke // 2010
Most design researchers working in Design Schools are involved in design education. These two activities, research and education, have the potential to feed and inspire each other, because they ...
Design, Make, Test
Childs, Peter;Robb, David // 2010
In the UK in the 1970s and early 1980s examples of best practice pedagogic experience included the egg-race type of design and make projects embodied in the student projects run by Ken Wallace at the ...
Development of Modular Product Families
Blees, C.; Jonas, H.; Krause, D. // 2010
This contribution presents a methodical approach for the development of modular structured product families. The method consists of four basic steps. In a first step, the technical-functional product ...
DIVERGENCE IN PLATFORM COMMONALITY: EXAMINATION OF POTENTIAL COST IMPLICATIONS
Cameron, B. G.; Rhodes, R.; Boas, R.; Crawley, E. F. // 2010
Platforming has become an important means of cost-sharing across industrial products. Among many benefits, platforming enables cost savings. Recent work by Boas [2008] has shown that products built ...
ECO-INNOVATION IN THE VALUE CHAIN
McAloone, T. C.; Mougaard, K.; Restrepo, J.; Knudsen, S. // 2010
It is well known that companies face challenges integrating environmental considerations into their product development processes and there is an established body of research focusing on ways and ...
FUNCTIONAL MODELLING FOR EFFICIENT GENERATION OF MECHATRONIC DESIGN AND VALIDATION MODELS OF AUTOMATED PRODUCTION INSTALLATIONS
Zafirov, R.; Kiefer, J.; Eigner, M. // 2010
This paper describes a new approach for the generation of mechatronic validation models of automated production installations. It points out the function structure as a possible reference model for ...
How to set up student projects within collaborative research projects
Eben, Katharina Gabriele Maria; Daniilidis, Charalampos; Lindemann, Udo // 2010
The opportunity of designing real products within the course of studies is of great significance for students in mechanical engineering, as they can apply their knowledge attained in lectures. For ...
Identifying Critical Areas for Styling Data Based Simulation to Evaluate Perceived Quality Related to Non-Rigidity
Wagersten, Ola; Söderberg, Rikard // 2010
When handling mass-produced parts in the automotive industry it is of great importance to take into consideration the geometrical variation that will occur as a result of the
manufacturing process ...
Improving the Mechanical Design Education by Hands-on Experience with Machine Parts
Beckmann, Gregor; Krause, Dieter // 2010
Mechanical engineering design education usually provides theoretical knowledge about machine parts and the required skills to develop products using methodical design approaches. Beside this, ...
INTERACTIVE VISUAL ANALYSIS AS A SUPPORT OF OPTIMIZATION AND ANALYSIS OF INTERNAL COMBUSTION ENGINES
Matkovic, K.; Klarin, B.; Jelovic, M.; Duras, M. // 2010
Multiple simulation runs, a process where many simulations with different parameters of the same model are ran, helps engine designers in getting insight. In order to cope with increased complexity ...
Investigating the Role of Simulation for Robust Plastic Design
Lorin, Samuel; Forslund, Karin; Söderberg, Rikard // 2010
For complex assemblies, variation, stemming from the manufacturing process, can propagate through the product and have a negative influence on its functionality. Today, various simulation tools are ...
Boolean Searches
The following examples demonstrate some search strings that use boolean operators:
- design community
Find rows that contain at least one of the two words. - +design +community
Find rows that contain both words. - +design community
Find rows that contain the word “design”, but rank rows higher if they also contain “community”. - +design -community
Find rows that contain the word “design” but not “community”. - +design ~community
Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not. - +design +(>community <decisions)
Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions” - design*
Find rows that contain words such as “design”, “designs”, “designing”, or “designer”. - "some words"
Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.